.png)
.png)
ABM-14 Plate and pipe beveler
ABM-14 is a beveling machine designed to mill plates and pipes made of carbon steel, alloy steel, stainless steel, or aluminum alloys.
Key features
In just one single run the machine can bevel up to 12 mm (1/2”) in width. Maximum bevel width is 14 mm (9/16’’). Depending on materials two or more runs are needed. The machine can bevel plates from top and bottom. Two optional ergonomic trolleys are available to make the operator’s work more effective and comfortable. Using an additional vertical roller guide ABM-14 can bevel concave edges if the curvature radius is 1500 mm or larger.
See also this product:- ABM 50 Auto feed bevelling machine
- bevels both small and large pieces to cover most of the common applications for its type
- auto-feed on large plates with optional trolleys
- beveling of the lower edge in an inverted position
- standard shearing cutter for machining stainless/alloyed steel
- 2 optional shearing cutters dedicated to carbon steel and to aluminum
- reversible spindle against stuck milling tool
- versatile and transportable on its own trolleys
- low noise
- possibility to bevel concave edges
Technical specification
| Voltage | 3~ 400 V + PE, 50-60 Hz |
| Power | 2200 W |
| Spindle speed | 9 rpm (for 50 Hz); 11 rpm (for 60 Hz) |
| Bevel angle range (ß – depending on angle device in use) |
30° 22.5°, 25°, 35°, 37.5°, 45° (options) |
| Bevel width (b) | up to 14 mm (9/16’’) |
| Maximum bevel in one single run | 12 mm (in 40 Kg/ 392 MPa carbon steel) |
| Minimum plate thickness | 6 mm (1/4’’) |
| Maximum plate thickness | 40 mm (1-9/16’’) |
| Minimum plate width | 55 mm (2-3/16’’) |
| Bevel length per minute | 2.6 m (8.5 ft) for 50 Hz; 3.1 m (10.2 ft) for 60 Hz |
| Minimum pipe ID | 100 mm (4”) |
| Weight | 65 kg (144 lbs) |
| Product Code: | UKS-0639-10-40-00-0 |
