.png)
.png)
Wel-Handy Multi II WEAVING
Description
WEL-HANDY MULTI II WEAVING is equipped with a weaving option to increase weldability and quality in multi-pass welding. The Weaving option is only available for the WEL-HANDY MULTI II WEAVING.
See also this product:- Wel-Handy Multi II
Features
Benefits & Features:
- Multi Purpose Welding
- Solid Aluminum Body
- Light Weight at 9.8kgs
- No Track Required
- Fillet welds and corner joints can be done without the need for track. Butt and Lap joints are possible by using angle iron as a guide.
- Limit Switches on Carriage Ends
- Automatically stops machine and weld at predetermined stop point
- Horizontal or Vertical Use
- Weld in flat or vertical up position
- Remote Controlled Weaving Option
- Allows user to dial in weave settings on the fly while viewing live weld
- Digital input
- Weaving length & times/ minutes, stop time can be input digitally.
- Driving speed indicator
- Actual driving speed is indicated by digital input.
Yes I'm Interested
Technical specifications
| Model Name | WEL-HANDY MULTI II (Weaving) | |||
| Machine Weight | Strong Magnet Model: 9.8 kg | |||
| Machine Dimension(W×D×H) | 310mm(W)×265mm(D)×264(H) | |||
| Traction Force | 12kg | |||
| Gap(F.L. ~ Bace Board) | 6mm | |||
| Magnet Up and Down Mechanism |
Magnet Lever | |||
| Driving Method | 4-Wheel Driving Rubber Roller (Chain Transmission) | |||
| Magnet-type | Permanent Magnet | |||
| Traverse Speed | 50?1500mm/min | |||
| Tracing Method | Guide Roller (being pushed against Vertical plates) | |||
| Applied Posture | Standard Magnet Model: Horizontal position Fillet Welding Strong Magnet Model: Vertical position Fillet Welding |
|||
|
Torch |
Torch Angle | 40°?55° | ||
| Up and down | 45mm | |||
| Forward and Backward |
45mm | |||
| Forward and Angle |
5° Angle at both Forward / Backward | |||
| Automatic Stop Function |
Limit Switch (equipped at both sides of Carriage at FL +20 mm height) |
|||
| Fine Adjustment of Carriage Position |
Included | |||
| Non-Welded Portion | Approximately 305 mm (in total at both Start and End point) |
|||
| Power Cable | Y-Branch Cable (Power and Signal cable Integrated) ? Carriage ~ Branch: 6 m, ? Branch ~ Power: 10 m, ? Branch ~ Wire Feeder: 0.5 m (with matching Panasonic-type Connector) ? Please consult when using welding machine other than Panasonic. |
|||
|
Welding Torch |
Straight WHM (C) - 350S & 500S | |||
| Curved 350A & 500A | ||||
|
Torch Hold Diameter |
Straight Torch Holder: φ20 mm | |||
| Curved Torch Holder: φ16~20 mm Diameter | ||||
| Moter | DC Motor with Encoder | |||
| Input Power | AC100?240??50/60?? | |||
